1.5 to 2.49 ton Digging Buckets

Prices are quoted ex VAT. 23% Irish VAT will be applied to Irish companies.

1.5 to 2.49 ton Digging Buckets
Digging Bucket for Mini-Excavator 1-2 tonne

1.5 to 2.49 ton Digging Buckets

Heavy duty excavator digging buckets for excavators from 1.5 to 2.49 tonnes in the mini digger range. For full details please download our product brochure pdf.

Please refer to the Excavator Fitting Guide if you are unsure of the make or model of your machine and how to check the measurements required. Note this is for reference only and may change depending on the actual machine. Variations may occur between models e.g. if they are an imported model.

If you require a non-standard size please Contact Us.

 

  • All our Mini range are made using 450 hb hardened blades, unlike the competitors. The blades will last a MINIMUM of 30% longer.
  • The roll plate used is Strenex 700mc, our competitors are using only mild steel. Our buckets will therefore last 50% longer.
  • A weld on teeth system is used on our buckets, allowing for ease of replacement. Ensuring less down time and lower maintenance cost for the customer in changing tips.
  • Our buckets have more breakout force due to the teeth as opposed to the bolt on type used by competitors.
  • Straps are horizontal across the bucket enforcing strength.
  • The bottom  half section of our quick hitches are made using 20mm hardox resulting in increased strength.

 


Machine Specs:

If the make or model you are looking for is not in the list below please select "other" to enter it manually

€215.00 Excl. VAT

Excavator Class:
From 0.8 tonne to 9.9 tonne

Bucket Width:
6 inches (150mm)
9 inches (230mm)
12 inches (300mm)
18 inches (450mm)
24 inches (600mm)
30 inches (750mm)
36 inches (900mm)
42 inches (1000mm)